STEERING PUMPS
Power steering systems depend on the hydraulic fluid circulated by the pump. When it’s time to replace this vital part, technicians and their customers want performance and value that lasts. That’s why we use a sustainable manufacturing process with an OE-quality focus.
- Components are inspected and cleaned of rust and corrosion.
- Shaft and internal surfaces are inspected, reconditioned and polished.
- Seals and O-rings are replaced with new, OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and performance.
As a sustainable manufacturer, our OE-experience and standards apply to our remanufactured power steering pumps that offer like-new quality and dependability in a broad range of applications for all makes and models.
STEERING RACK AND PINION
Our goal is to provide service technicians with sustainably manufactured rack and pinion steering units they can trust. This enables them to offer their customers dependable steering performance and great value. During our OE-engineered remanufacturing process, rack and pinion units receive close attention.
When our engineers apply their OE-experience and high standards to steering, the result is sustainably manufactured rack and pinion products of exceptional quality for all makes and models.
- Components are inspected and tested for straightness and structural integrity.
- Housings are bead-blasted to eliminate rust and/or corrosion.
- Sealing surfaces are polished, restored and checked for smoothness.
- Seals and boots are replaced with new OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and steering performance.
Steering Pumps
The Remy steering pumps come ready for installation with:
- Pre-installed steel pulleys and reservoirs
- Filters, clamps & mounting hardware
- Remote reservoirs are included for units that have been identified as failure prone due to clogged filter/screen.
Steering Rack & Pinions
The Remy steering rack & pinions come ready for installation with outer tie rods and jam nuts included so there is no need to reuse any worn or corroded parts.
Steering Gears
The Remy steering gears come ready for installation with Pitman arms and fasteners included which eliminates the need for special tools or torches to remove and reuse old pitman arm.
STEERING GEARS
Steering gears, also known as recirculating ball gears or gear boxes, are used in the steering systems for rear-wheel-drive cars and trucks. As a sustainable manufacturer, BBB remanufactures for all makes and models with precision, using an OE-engineered process that is similar to how new gears are made.
- Gear housings are inspected and bead-blasted to eliminate rust and corrosion
- Sector shafts are Magnafluxed to ensure structural integrity
- Sealing surfaces are inspected, reconditioned and polished
- All serviceable seals and O-rings are replaced with new, OE-equivalent parts
- Recirculating balls are 100% replaced with matched sets sized to ensure correct feel and performance
- Assembled units are 100% functionally tested for leaks and performance
Because of our OE approach to remanufacturing, technicians and their customers can expect replace-ment steering gears that help to restore the responsive steering that cars, light trucks and SUVs had when they were new.
HYDRAULIC STEERING TECHNICAL VIDEOS
How to vacuum bleed a power steering system
One of the most common causes of noise and whines in a power steering pump is simply just air in the system. That’s why vacuum bleeding the power steering system is critical for peak performance.
Watch VideoPower Steering Flush and Proper Fluid
A common cause of failure in the power steering system is incorrect fluid. Learn why you should use the manufacture specified fluid that your vehicle calls for to avoid contamination in your system.
Watch Video